Front Row Sound
Enjoy bold sound for TV, music, and more with a pair of in-wall speakers powered by Amp. Control with the Sonos app, Apple AirPlay 2, and more.
Includes: Amp, In-Wall Speaker (Pair)



2.52 x 8.54 x 8.54 in. (64 x 217 x 217 mm).
4.6 lb (2.1 kg).
Black
Touch interface with volume up/down, previous/next track and play/pause.
7.87 x 11.76 x 3.54 in. (199.9 x 298.7 x 90 mm).
6.93 x 10.75 in. (176mm x 273mm).
4.61 lbs. (2.095 kg) per speaker.
AC 100-120/220-240 V, 50-60 Hz
Connects to your home WiFi network with any 802.11b/g, 2.4 GHz broadcast-capable router for uninterrupted wireless streaming.
Dual Ethernet ports can connect Amp to a wired home network and allow for connection of additional Sonos players.
Works with AirPlay 2 on Apple devices iOS 11.4 and higher.
When these speakers are connected to Sonos Amp, Amp will automatically detect them, and automatically adjust the sound to be best for that speaker. This is only possible because we designed the speakers from the ground up with Sonance. This also means the indoor models (In-Wall and In-Ceiling) are the only passive speakers to support Sonos’s Trueplay tuning, which tunes the system to the room environment.
No, only the In-Wall and In-Ceiling speakers will support Trueplay. The Outdoor speakers will not, since the outdoor environment is not favourable to Trueplay.
The Sonos Amp has been designed to power up to three pairs of Sonos Architectural speakers on a single Sonos Amp.
The Sonos Architectural speakers will work with most amplifiers. However, you will not be able to take advantage of the TruePlay room-tuning capabilities with any amplifier other than Sonos Amp.
Only the Sonos Outdoor by Sonance model is rated for outdoor use. The In-Wall and In-Celling models are not rated for outdoor use and should only be installed indoors.
The Sonos In-Ceiling by Sonance speakers use a cut-out hole that is 8 1/4" in diameter. If your existing hole is that size (or smaller), the Sonos speakers will fit but may require a small amount of drywall to be removed (if the hole is smaller than 8 1/4"). The Sonos In-Wall by Sonance speaker cut-out dimension are 7” x 10 3/4"; if your opening is the same size or smaller, the same rules apply. If your opening is larger than these holes, the speakers will not fit, and drywall work will be required to patch and recut a hole to fit your Sonos Architectural speakers.
We recommend using wire that is 16 ga or larger. For the in-wall and in-ceiling speakers, we recommend using wire rated to be buried inside walls and ceilings. For the outdoor speakers, we recommend using wire that is rated for outdoor use.
If you are using the in-wall speakers to replicate sound from your TV, the speakers should be installed a few inches away from the right and left edges of the television, with the tweeter of the speaker installed as close to ear level (from the seating position) as possible. If you are using the in-wall speakers as distributed audio speakers and not flanking a television, we recommend placing them in a location that will provide the best coverage for the room.