Move is the durable, battery-powered smart speaker for indoor and outdoor listening.





Controls and lights


Volume control

  • Touch and hold to quickly change the volume:

  • Volume up (right); Volume down (left).



  • Press once to play or pause music.

  • Press and hold to add the music that’s playing in another room.



  • Swipe right across the touch controls to skip to the next song.

  • Swipe left to go to the previous song.

Note:You can’t skip forward or go back when listening to a radio station.


Microphone indicator

Tap the microphone light to turn the microphone on or off.

  • When the light is on, auto Trueplay tuning is enabled. If you have a voice service set up, voice control is also on.

  • When the light is off, voice control and auto Trueplay are off.

Status light


Indicates the speaker’s status. Learn more

If the light is distracting, you can turn it off in your room’s settings.

Battery light


Indicates the battery status.

  • Blinking orange: low battery.

  • Solid orange: charging. The light may stay on for several minutes depending on how low the battery is. The battery will continue to charge when the light turns off.
    Learn more

Note:Move’s remaining battery life is always visible in the Sonos app.

Battery Saver: To save battery life, you can set Move to power off automatically instead of going to sleep. Go to S2-settings-grey.png > System, and choose Move. It won't appear in the Sonos app until it’s powered back on.
Learn more

Note:If you don’t want anyone (like a child) to control playback or change the volume using the speaker touch controls, you can disable them in the room’s settings.


Join button


Press to connect to your Sonos system during setup.

USB-C port


Use a compatible USB-C charger for charging on the go.

  • USB port may also be used for diagnostic purposes. (It can’t stream large data files, like some music files).

Note:USB-C cable not included.

Power button


Press to power on; short press to put to sleep; long press (5 seconds) to power off.

If Move is off the charging base, it goes to sleep to save battery when you’re not using it. Just press the power button to wake it up.

Bluetooth/WiFi toggle button


Toggles between Bluetooth and WiFi. Use WiFi for setup; stream content over WiFi or Bluetooth®.



Allows for easy lifting and carrying so you can take the speaker wherever you go.


Charging base (included)


  • Just set Move on the charging base for easy recharging—no extra wires or cables needed.

  • Make sure the speaker is seated properly in the base and the charging contacts are touching.

  • Charging base is for indoor use only—be sure to keep it dry.

Note:Move’s remaining battery life is always visible in the Sonos app.

AC power


100-240 VAC, ~50/60 Hz, 1.2 A. Output: 18.0 VDC, 2.5 A, 45.0W

USB port for charging on the go


Use a compatible USB-C charger (type C PD power with 45W, 20V/2.25A)

Select a location

You can put your speaker just about anywhere. Here are a few guidelines:

Automatic Trueplay™

You can put Sonos Move just about anywhere. Auto Trueplay tuning optimizes the sound for wherever you are and whatever you’re listening to. Your speaker’s microphone is used to detect the environment so auto Trueplay can make periodic tuning adjustments to deliver the best sound.

If you don’t want the microphone on all the time, be sure to turn it on whenever you move the speaker. Your Sonos Move starts retuning when you pick it up, and continues to adjust the sound for a few minutes after you place it in a new location.

Microphone on/off

The microphone is used for voice control, and for auto Trueplay tuning. Touch ALL_mic00019.png to turn the microphone on or off.

When the microphone light is on,

When the microphone light is off,

Switch modes

Set Move up on your WiFi, then use the mode switch on the back of Move to switch between Bluetooth and WiFi. When you use Bluetooth for the first time, you’ll need to pair Move with your device. Once paired, they’ll reconnect automatically next time.

Bluetooth pairing

  1. Turn Bluetooth on in your device settings.

  2. Press the mode button on the back of Move to switch to Bluetooth.

  3. Choose Move from the list of available devices in your Bluetooth settings. If it’s not there, press and hold the mode button and choose Move from the list when it appears.

You’ll hear a confirmation tone when your device is paired with Move. They’ll automatically connect next time you switch Move to Bluetooth.


For add-ons tailored to perfectly fit your Move, see Accessories on our website.


Sonos Move





Two Class-D digital amplifiers.


One tweeter creates a crisp and accurate high frequency response.


One mid-woofer ensures the faithful playback of mid-range vocal frequencies plus deep, rich bass.


  • Far-field microphone array.

  • Microphone LED, hard-wired to the voice microphones for extra privacy control so you’re always aware when the microphone is active.

Voice Control

Integrated voice control.


Wireless Connectivity

Connects to WiFi network with any 802.11a/b/g/n 2.4 or 5 GHz broadcast-capable router


Power Supply

Charging base:100-240 VAC, ~50/60 Hz, 1.2 A. Output: 18.0 VDC, 2.5 A, 45.0 W

USB port: USB type C PD power with 45W, 20V/2.25A.

Battery pack

Capacity: 2420-2500maH

Replacement: Visit our website for more information.

Disposal: Check with your local waste or recycling company to determine the proper disposal method in your area.

Dimensions (H x W x D)

9.44 x 6.29 x 4.96 in (240 x 160 x 126 mm)


6.61 lb (3.0 kg) (including the battery)

Operating Temperature

32º to 113º F (0º to 45º C)

Storage Temperature

-13º to 158º F (-25º to 70º C)

Humidity Resistant

Move meets IP56 water and dust resistance levels. Just don’t leave it out in a soaking rainstorm.

Note:The charging base included with Move is for indoor use only.

Product Finish

Black with black grille

Package Contents

Sonos Move, charging base, and Quickstart guide.

* Specifications subject to change without notice.

Charging base

Charging base


  • Just set Move on the charging base for easy recharging.

  • Charging base is for indoor use only—be sure to keep it dry.

Note:Move’s remaining battery life is always visible in the Sonos app.

AC power


100-240 VAC, ~50/60 Hz, 1.2A. Output: 18.0 VDC, 2.5 A, 45.0 W

Average active efficiency



Efficiency at low load (10%)



No-load power consumption



Charging contacts


Make sure the speaker is seated properly in the base and the charging contacts are touching.

Important safety information

Please read these instructions and heed all warnings. Keep them in a convenient location and make sure everyone in the household is aware of them.

Caution:Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Clean only with dry soft cloth. Household cleaners or solvents can damage the finish on your Sonos products.
If the charging base leaves a mark on wood furniture, remove with wood polish.

6. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

7. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.

8. Do not expose batteries (battery pack or batteries installed) to excessive heat such as sunshine or fire.

9. Protect the power cable from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

10. Only use attachments/accessories specified by the manufacturer.

11. Unplug this apparatus during lightning storms or when unused for long periods of time.

12. Refer all servicing to Sonos qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cable or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

13. The Mains plug should be readily available to disconnect the equipment.

14. Warning.pngWarning: Move meets IP56 water resistance levels. To reduce the risk of fire or electric shock, don’t expose this apparatus to a soaking rain storm.