The versatile amplifier for powering all your entertainment.
Bring the Sonos experience to your floor-standing, in-wall, in-ceiling, outdoor, and bookshelf speakers with Amp.
2.52 x 8.54 x 8.54 in. (64 x 217 x 217 mm).
4.6 lb (2.1 kg).
Touch interface with volume up/down, previous/next track and play/pause.
AC 100-120/220-240 V, 50-60 Hz
Connects to your home WiFi network with any 802.11b/g, 2.4 GHz broadcast-capable router for uninterrupted wireless streaming.
Dual Ethernet ports can connect Amp to a wired home network and allow for connection of additional Sonos players.
Works with AirPlay 2 on Apple devices iOS 11.4 and higher.
Amp is more powerful than Connect:Amp, supporting 125 Watts per channel versus 55 Watts per channel. Amp also features an HDMI ARC input for TV integration, allows control with Apple AirPlay 2, and supports Trueplay when powering Sonos Architectural by Sonance. Both Amp and Connect:Amp have RCA line-in options.
Amp can power two pairs of 8 Ohm nominal passive speakers when wired in parallel. Amp can power three pairs of Sonos Architectural by Sonance wired in parallel.
No. All speakers must have the same impedance rating and be wired in parallel.
No. Each Amp acts as one zone, meaning all speakers wired to a single Amp will play the same content at the same volume.
This setup requires two Amps, one to integrate the TV and power the front speakers and another to power the rear speakers.
Yes. You have access to dozens of streaming services through the Sonos app. You can also control your system directly from select partner app, including Spotify and Pandora, or by using Apple AirPlay 2 with your iOS device.
Streaming services are set up through the Sonos app. You can also use Apple AirPlay 2 on an iOS device or stream directly from certain music services, such as Spotify and Pandora.
If your computer outputs audio through an HDMI ARC connection, you can use it to control Amp. Additionally, the Sonos HDMI Adapter (sold separately) allows you to connect a computer with an optical SPDIF output to Amp.
The damping factor is approximately 400 with an 8 Ohm speaker.
For the best sound and most reliable performance, we recommend using banana plugs. Amp comes with custom-designed banana plugs and is designed to work with any standard banana plug. Amp can also accommodate a straight wire connection with 10 to 18 AWG wire.
Yes. You can connect your CD player to Amp using the analog input. Select Line-In from the source menu in the Sonos app to begin listening.
Yes. Amp is a single-zone product, which means all connected speakers will play the same content at the same volume.
No. Amp only has speaker outputs. It does not have any analog or digital output for connecting to an AVR.
Amp provides 125W continuous average power sine wave, into an 8 Ohm load, both channels driven.